Industrial Process Energy Consultants
shape

Heat Recovery for CHP

Heat Recovery for Combined Heat and Power Engines

Combined Heat & Power Engines, known as CHP engines are used across multiple industries to deliver electrical energy. CHP engines operate at around 35% efficiency, with two thirds of energy input lost as waste heat.

Process Energy deliver solutions to recover this waste heat back into the process, either from the cooling jacket or hot flue gases.

On-site Energy Audit

Book your Site-Wide Thermal Energy Consultation

Process Energy don’t just focus on the individual application, we look at the entire process to understand how energy efficiency gains can be made.

By optimising the entire process, we ensure you’re only using the energy required for the process. We then deliver heat recovery solutions for your CHP engine to maximise savings.

Heat Reduction Services

How much can your business save?

Invite us to come and calculate the level of savings you can achieve by optimising your industrial processes.

Energy Reduction Case Studies

Welcome to our FAQ page dedicated to industrial energy reduction and reclamation.

£179,000 Cost Saving Per Year

Process: CHP Gas Engine

Energy Saving: 720 kWh

ROI: Less than 2 years

£600,000+ Cost Saving Per Year

Process: Coil Coating

Energy Saving: More than 2500 kWh

ROI: Less than 1.5 years

£530,000 Cost Saving Per Year

Process: Thermal Oxidiser Heat Recovery

Energy Saving: 3,920,000 kWh/year

ROI: Less than 2 years.

£165,000 Cost Saving Per Year

Process: Floatation Dryer

Energy Saving: 750 kWh

ROI: Less than 2 years

£100,000 Cost Saving Per Year

Process: Bakery - Bread

Energy Saving: 350 kWh

ROI: 2 Years